Rubber tracks for Fermec

Fermec rubber tracks – technology for professionals

The rubber tracks for Fermec machines are distinguished by an advanced design that combines steel cords with a high-quality rubber compound. The internal reinforcement with continuous steel cables, vulcanized in a uniform thermal process, increases tensile strength by approximately 40% compared to standard segmented models.

The outer layer of rubber, hardened during the production process, minimizes abrasion, while the flexible core absorbs dynamic loads. The tread with an optimized pattern provides traction on various surfaces – from loose soil to hardened concrete – while simultaneously reducing noise and vibrations.

Rubber tracks for Fermec mini excavators

Fermec mini excavators, such as the models from the 100 or 600 series, are valued for their compactness and versatility. Our rubber tracks are tailored to their specifications, offering widths from 180 mm to 600 mm and various link configurations, such as 230x48x66 or 300x52.5x80.

Their lightweight construction facilitates maneuvering in confined spaces, and their high resistance to cuts and tears makes them reliable even on rocky terrain. This is an ideal choice for operators working in conditions requiring precision and stability.

Fermec rubber tracks - benefits compared to steel

Unlike steel tracks, rubber counterparts for Fermec machines offer unique advantages:

• Lower pressure on the ground - reduction of footprints on lawns or sidewalks.
• Smaller mass - improving fuel efficiency and reducing the wear of the drive system.
• Quiet operation - crucial in residential areas.

Thanks to these properties, rubber tracks are the preferred choice in applications where surface protection and work comfort are important.

How to choose rubber tracks for Fermec?

The choice of tracks depends on the model of the Fermec machine and the working conditions. For example, tracks with a short pitch (e.g., 230x48x66) with a greater number of links ensure smooth driving on hard surfaces, while models with a longer pitch (e.g., 300x96x38) perform better in mud or gravel.

Before purchasing, it is worth checking the machine's technical specifications - track dimensions, chain pitch, and permissible load. Our experts will help you choose the optimal product - contact us!

Installation of Fermec rubber tracks

Replacing the tracks on Fermec machines involves several steps. First, lift the machine using the bucket and blade to relieve the undercarriage. Loosen the tensioner, remove the old track, and then install the new one, ensuring it is properly seated on the drive wheels and rollers.

After assembly, adjust the tension to a value of 10-20 mm (according to the Fermec instructions), which will ensure stability and extend the lifespan of the track. Regularly checking the tension every 50-100 hours of operation is crucial to avoid premature wear.

Caterpillar Tracks for Fermec – Glimat Store Offer

At Glimat, we offer rubber tracks for Fermec that meet the highest quality standards - from materials to the production process. Our products are tested for tensile strength, abrasion, and weather conditions, ensuring their reliability.

Thanks to a wide range of products, fast delivery, and professional advice, we provide comprehensive support for Fermec machine operators. Check out our offer and invest in components that will enhance your work efficiency!